Image source: wikihow
Tiles enhance the beauty of your house, comes with a variety of shapes and size to compliment your style. To keep its beauty intact you need to clean it on a regular basis. Unclean floors not only dulls its look but also unhygienic for you and your family. Grout is a far difficult thing to clean and simple mopping will not help you in this task. In the market there come several grout cleaners with high prices on top of that potentially destroys your tiles with the passage of time. Machines that are used for grout cleaning are far better than that of the cleaners. Have quick research on the best machines to clean tile floors and grout.
Nevertheless, the best ways to remove a stain is by simply using homely things that are cheap as well as best but if you are looking for best machine to clean tile floors and grout then click here.
If you want to know how to clean tile floors and grout then follow these steps to clean like a pro:
BAKING SODA, VINEGAR AND WATER MIXTURE
FORM a paste of water and baking soda by mixing up ¾th of the baking soda with that 1/4th of water; this will give you a thick yet smooth paste. The two should be mixed in right portion you do not want drier or a very shabby paste. On the grout lines with the help of your finger or brush, rub the paste directly. Do not touch the paste if you have sensitive skin, this might result in skin rashes.
FORM another solution by mixing water and vinegar together. The ration between water and vinegar must be equal. Spray the solution over the grout lines covered with a paste of baking soda. The bubbles coming out are the indication that the natural process of cleaning has started. Do not apply the vinegar spray over your natural stones or the tiles that are made up of such a thing.
LET the bubble stop from coming out of the solution. The bubbling process starts due to the chemical reaction, which takes places between vinegar and soda. The stoppage of coming out of the bubble signifies that the works of both the chemicals are done onto your surface.
SCRUB OUT the whole area with the nylon brush. You may use a toothbrush for the task. Try to scrub out as much as you can. Keeping those chemicals on your floors can have an adverse effect. Do have a close look at the corners of your floors and clean the grout lines efficiently.
THE ULTIMATE TASK is to mop the entire area thrice to ensure not an inch of chemicals remain on the floor. In a bucket simply take the plain water dip your dry mop, remove the excess water from the mop. Start mopping over the area where you applied all the mixture of chemicals. Those chemicals should be removed from your tiles as soon as possible, once their work is done. Rinse the mop and change the bucket of water so that you do not keep spreading the chemicals all over the surface.
MIXTURE OF HYDROGEN PEROXIDE, DISH WASH AND BAKING SODA
MIX in a bowl 1 tablespoon of dish wash with 3/4th baking soda with 1/4th hydrogen peroxide. This mixture cleans the tiles in three different steps; however, it may have adverse affect your coloured tiles so check this process on a small, hidden area before pasting it on to the entire floor.
DO NOT touch this paste with bare hands; it is advisable to apply it with scrubbing brush made of nylon or toothbrush. The chemical present in the paste may cause skin infection or rashes.
ALLOW the mixture to work on the tiles grout lines for around 10 to 15 min. The timing depends on the amount of grout collected on your floors.
BOIL water at such temperature that may not harm you while mopping. Pour a little amount of warm water directly on the grout lines. You can pour water in one place at a time rather than making a mess by pouring water on the whole area.
WIPE out the grout by scrubbing the floor with a towel. This will help you in both removing the water as well as grout from the area. In an empty bucket squeeze, the amount of dirty water collected, rinse the towel with clean water and continue the process.
FINALLY with clean water and dry mop, start mopping the tiles to make sure that no residues are left behind. Change your water bucket and wash your mop often to get better cleaning.
WITH THE HELP OF OXYGENATED BLEACH
MAKE a solution in two cups of hot water boiled at 100 degrees pour 2 spoons of bleach the oxygenated one. The bleaching property may harm your coloured floors so do check before spreading all over the tiles. Otherwise, it is mild enough for all types of floors.
POUR the solution directly on the grout lines, even in this case too it is better for you to pour the solution over one particular area clean it and go further. The completely drenched floors are slippery looks both messy and you might end up getting hurt.
ALLOW the solution to work effectively on the grout by leaving it for a few minutes May 5 to 10 min, then with the help of nylon brush start scrubbing out the area. Scrub out the inner corners as dirt mostly gets accumulated over there.
DIPPING the scrubbing brush into oxygenated bleach is a good technique to intensify your cleaning. Some grouts are really stubborn in such cases bleaching solution won’t help you. In such case keep a little amount of powder separately; dip your wet brush start scrubbing over the darker area. Try not to mix water with the main oxygenated bleach container as it decomposes.
WASH the floors with water once you are done the scrubbing. Pour warm water directly on the floors and either with the help of a rag or with clean mop dry out your area properly.
These products are quite budget-friendly and proven to be very impactful in terms of cleaning the floor tiles and grout. Try out the most appropriate process that suits your tiles the best. Or you can too go for machines that clean very well but might not be that much budget-friendly option. Go for anyone and have a beautifully clean and hygienic home for yourself and for your loved ones.